Wacom Tablet Support
The Graphics Agent for Linux supports Wacom tablets in two configurations: bridged, where peripheral data is sent to the desktop for processing, and locally terminated, where peripheral data is processed locally at the Anyware client.
Locally Terminated Wacom Tablets
Locally-terminated tablets have greatly improved responsiveness, and tolerate higher-latency (including 25ms and higher) networks.
For the best experience and most complete device support, use the latest available Anyware agent, Anyware software client, and Anyware Zero Client firmware. To find out when support was added for individual Wacom device, refer to the release notes for your client.
Caution: Using Wacom Local Termination on Ubuntu Cloud Hosts
Cloud-based Ubuntu hosts may fail to properly handle locally terminated Wacom tablets. When this occurs, pressure sensitivity and other advanced features will not work properly. To correct this issue, follow this procedure.
The following Wacom tablet models have been tested and are supported with local termination mode:
Anyware client support for locally terminated Wacom tablets and the Graphics Agent for Linux
| Anyware Tera2 Zero Client |
Anyware Software Client for Windows |
Anyware Software Client for macOS |
Anyware Software Client for Linux |
|
|---|---|---|---|---|
| Intuos Pro Small PTH-460 |
— | ✔ | ✔ | ✔ |
| Intuos Pro Medium PTH-660 |
✔1 | ✔ | ✔ | ✔ |
| Intuos Pro Large PTH-860 |
✔2 | ✔ | ✔ | ✔ |
| Movink 13 DTH-135 |
— | ✔3 | ✔ 4 | ✔ 5 |
| Cintiq Pro 16 DTH-167 |
— | ✔ | ✔ | ✔ |
| Cintiq 22 DTK-2260 |
— | ✔ | ✔ | ✔ |
| Cintiq 22HD DTK-2200 |
✔6 | ✔ | — | ✔ |
| Cintiq 22HDT - Pen & Touch DTH-2200 |
✔7 | — | — | — |
| Cintiq Pro 24 DTK-2420 |
✔8 | ✔ | — | ✔ |
| Cintiq Pro 24 - Pen & Touch DTH-2420 |
✔9 | ✔ | ✔ | ✔ |
| Cintiq Pro 27 DTH-271 |
— | ✔ | ✔ | ✔ |
| Cintiq 32 Pro - Pen & Touch DTH-3220 |
✔10 | ✔ | ✔ | ✔ |
Important: Touch is not supported
Touch features of Wacom devices are not supported with local termination.
Other Wacom tablets may work, but have not been tested and should not be used in production environments.
Bridged Wacom Tablets
Bridged Wacom tablets are supported only in low-latency environments. Tablets in network environments with greater than 25ms latency will show reduced responsiveness and are not recommended.
The following Wacom tablet models have been tested and are supported with bridged mode:
Anyware client support for bridged Wacom tablets and the Graphics Agent for Linux
| Anyware Tera2 Zero Client |
Anyware Software Client for Windows |
Anyware Software Client for macOS |
Anyware Software Client for Linux |
|
|---|---|---|---|---|
| Intuos Pro Small PTH-460 |
✔ | ✔ | ✔ | ✔ |
| Intuos Pro Medium PTH-660 |
✔ | ✔ | ✔ | ✔ |
| Intuos Pro Large PTH-860 |
✔ | ✔ | ✔ | ✔ |
| Movink 13 DTH-135 |
— | ✔11 | ✔ 12 | ✔ 13 |
| Cintiq Pro 16 DTH-167 |
— | ✔ | ✔ | ✔ |
| Cintiq 22 DTK-2260 |
✔ | ✔ | ✔ | ✔ |
| Cintiq 22HD DTK-2200 |
✔ | ✔ | ✔ | ✔ |
| Cintiq 22HDT - Pen & Touch DTH-2200 |
✔ Ubuntu only |
✔ Ubuntu only |
✔ Ubuntu only |
✔ Ubuntu only |
| Cintiq Pro 24 DTK-2420 |
✔ | ✔ | ✔ | ✔ |
| Cintiq Pro 24 - Pen & Touch DTH-2420 |
✔ | ✔ | ✔ | ✔ |
| Cintiq Pro 27 DTH-271 |
— | ✔ | ✔ | ✔ |
| Cintiq 32 Pro - Pen & Touch DTH-3220 |
✔ | ✔ | ✔ | ✔ |
Note: Support for Other Wacom Tablets
Other Wacom tablets have not been tested, but may work.
Caution: Do Not Calibrate Pen Displays from Wacom Center
We recommend that you NOT calibrate your pen display from Wacom Center on the host machine. Doing so might result in the cursor getting offset when the tablet is used during a PCoIP session.
- 1Local termination for Intuos Pro Small and Intuos Pro Medium requires Tera2 Zero Client firmware 6.2.0 or higher.
- 2Local termination for Intuos Pro Small and Intuos Pro Medium requires Tera2 Zero Client firmware 6.2.0 or higher.
- 3Untested, but expected to work.
- 4Untested, but expected to work.
- 5Untested, but expected to work.
- 6Local termination for Cintiq 22HD, 22HDT, 24P, and 24PT requires Tera2 Zero Client firmware 6.5.0 or higher.
- 7Local termination for Cintiq 22HD, 22HDT, 24P, and 24PT requires Tera2 Zero Client firmware 6.5.0 or higher.
- 8Local termination for Cintiq 22HD, 22HDT, 24P, and 24PT requires Tera2 Zero Client firmware 6.5.0 or higher.
- 9Local termination for Cintiq 22HD, 22HDT, 24P, and 24PT requires Tera2 Zero Client firmware 6.5.0 or higher.
- 10Local termination for Cintiq Pro 32PT requires Tera2 Zero Client firmware 20.04 or higher.
- 11Untested, but expected to work.
- 12Untested, but expected to work.
- 13Untested, but expected to work.