Reverting to Legacy Certificates after changing the PCoIP Management Console 2.x and 3.x certificate causes the web interface to fail to load
Problem The certificate of the PCoIP Management Console has been updated but the web interface now fails to load.   Cause After uploading the new certificate to the PCoIP Management Console, if your any reason that certificate is not supported, the web …
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Do PCoIP Zero Clients and PCoIP Remote Workstation Cards support dynamic DNS?
Dynamic DNS allows for method of keeping a domain name record linked to a changing IP address. PCoIP Zero Clients and PCoIP Remote Workstation Cards do not currently support Dynamic DNS registration. They rely on the DHCP server to register the name when …
How do I change the FQDN (Fully Qualified Domain Name) of a PCoIP Zero Client?
First, change the PCoIP name to a new name. Currently, the "PCoIP Device Name" can only be changed on an individual basis in two locations: The  "OSD--> Configuration--> Label"  tab The  "AWI--> Configuration--> Label"  tab The default format is  …
Will out of order packets impact a PCoIP session?
PCoIP will work when packets are becoming out of order between the two PCoIP endpoints. Re-ordering packets on PCoIP endpoints requires that packets are held in a queue/buffer while waiting to receive the packets that need to be put back into order.  With …
In VMware Horizon View, what does it mean when a particular USB issue happens on both the VMware View client and the PCoIP Zero Client?
Answer: If a USB peripheral has the same issue on both PCoIP Zero Clients and VMware View clients (repurposed PC, notebook or thin client running the View Client), it's likely that the issue is in the VMware virtual USB hub driver, or is an issue with …
When using Management Console 3.0.0 I am not able to manage zero clients?
Impacts:   PCoIP Management Console 3.0.0 Scenario: When migrating from Management Console 2.x to Management Console 3.0.0 many zero clients fail to connect to the management console. If the management console is power cycled the zero clients are now able …
Does the Phillips Digital Pocket Memo work with a PCoIP Zero Client and VMware Horizon View?
Scenario A Philips Digital Pocket Memo (DPM) device does not operate after connecting to a PCoIP Zero Client using the USB EHCI controller (USB 2.0). Occasionally the PCoIP Zero Client unexpectedly restarts.   Cause The Philips Digital Pocket Memo device …
Do all log entries marked (CAUTION!) indicate a possible critical issue?
No, log entries marked with (CAUTION!) are not necessarily a critical issue. The case below states such a case but it is still essential to note these log entries could be indicative of a potential issue.   Scenario 1 You see caution errors similar to the …