Do all log entries marked (CAUTION!) indicate a possible critical issue?
No, log entries marked with (CAUTION!) are not necessarily a critical issue. The case below states such a case but it is still essential to note these log entries could be indicative of a potential issue.   Scenario 1 You see caution errors similar to the …
Knowledge Base Article Advisory Remote Workstation Card Zero Clients
Last modified: September 12, 2023
360
Why does the Management Console not recognize the DNS-SRV records and not connect with my PCoIP Zero Clients?
Scenario On a non-Microsoft DNS server, the DNS records have been created and the SRV record set for auto-discovery. However, the PCoIP Management Console is not recognizing these records and the PCoIP Zero Client devices are not registering in the …
Knowledge Base Article Troubleshooting Management Management Console Zero Clients
Last modified: September 19, 2023
364
Do PCoIP Zero Clients support VLAN tagging?
HP Anyware PCoIP Zero Clients do not support VLAN tagging. If an environment requires VLAN tagging, tagging will need to be performed on a network device's (switch / router) through configuration as as placing the port in access mode and tagging the …
Knowledge Base Article Advisory Zero Clients
Last modified: September 22, 2023
357
In VMware Horizon View, what does it mean when a particular USB issue happens on both the VMware View client and the PCoIP Zero Client?
Answer: If a USB peripheral has the same issue on both PCoIP Zero Clients and VMware View clients (repurposed PC, notebook or thin client running the View Client), it's likely that the issue is in the VMware virtual USB hub driver, or is an issue with …
Knowledge Base Article Troubleshooting Peripheral Devices Third Party Enhancements Zero Clients
Last modified: September 3, 2023
358
Will out of order packets impact a PCoIP session?
PCoIP will work when packets are becoming out of order between the two PCoIP endpoints. Re-ordering packets on PCoIP endpoints requires that packets are held in a queue/buffer while waiting to receive the packets that need to be put back into order.  With …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card Zero Clients
Last modified: December 9, 2022
355
Why am I seeing high bandwidth from the PCoIP Zero Client for audio even though I am not recording anything?
Problem As soon as an audio application starts and samples data from the audio input, PCoIP traffic from the client to host increases significantly and is steady.   Cause Once an application requests audio from the line in or microphone inputs, the PCoIP …
Knowledge Base Article Troubleshooting Performance Zero Clients
Last modified: April 27, 2023
354
The incorrect workstation powers on when trying to connect to a PCoIP Remote Workstation Card from a PCoIP Zero Client
Problem You might encounter the following problem if you use a PCoIP Zero Client to switch between workstations, i.e. computers with a PCoIP Remote Workstation Card (host card) installed: the first workstation wakes up and connects normally, but the …
Knowledge Base Article Troubleshooting Remote Workstation Card Zero Clients
Last modified: September 19, 2023
344
How can I tell if the 802.1x certificate uploaded successfully?
A good test is to use the web UI to upload the 802.1x certificate. From the web UI, go to Upload> Certificate and view the screen. If the certificate is listed after a restart of the PCoIP Zero Client then the certificate was uploaded successfully (see …
Knowledge Base Article Tutorial Security Remote Workstation Card Zero Clients
Last modified: August 23, 2018
335
How do I change the FQDN (Fully Qualified Domain Name) of a PCoIP Zero Client?
First, change the PCoIP name to a new name. Currently, the "PCoIP Device Name" can only be changed on an individual basis in two locations: The  "OSD--> Configuration--> Label"  tab The  "AWI--> Configuration--> Label"  tab The default format is  …
Knowledge Base Article Advisory Management Management Console Zero Clients
Last modified: September 3, 2023
336