Should I configure "Maximum Initial Image Quality" to 100 if I want lossless still image?
No. Regardless of PCoIP image-quality settings, still images are always lossless. The time it takes to display them depends on your image-quality settings and available network bandwidth. For most situations, it is recommended to use 40 for Minimum Image …
Knowledge Base Article Advisory Performance Display Remote Workstation Card HP Anyware Zero Clients
Last modified: December 9, 2022
432
What is Standalone mode?
  Answer: Standalone mode lets a Tera1 PCoIP Remote Workstation Card operate without installation in a PCIe slot. In Standalone mode, the PCoIP Remote Workstation Card is powered from a floppy drive (+5V/+12V) power connector instead of from a PCIe slot. …
Knowledge Base Article Tutorial Remote Workstation Card
Last modified: September 19, 2023
432
Skipped compressing pkt due to PCM bit length in the PCoIP Remote Workstation Card Logs
Scenario User notices poor audio quality when connected to a PCoIP Remote Workstation Card (host card), and the following entries are in the PCoIP Remote Workstation Card's logs: 12/04/2013, 00:01:41> LVL:3 RC: 0 AUDIO_CMPRS :Skipped compressing pkt due …
Knowledge Base Article Troubleshooting Performance Remote Workstation Card Zero Clients
Last modified: August 3, 2023
416
What types of USB devices are supported in Linux with the PCoIP Remote Workstation Card?
The Tera2 PCoIP Remote Workstation Card presents a Open Host Controller Interface (OHCI) and Enhanced Host Controller Interface (EHCI), supporting the USB 1.0 and USB 2.0 specifications respectively, via the PCIe 1x connector to the motherboard. If is up …
Knowledge Base Article Advisory Peripheral Devices Remote Workstation Card
Last modified: August 2, 2023
417
After upgrading Windows, why can I no longer wake my PCoIP Remote Workstation Card host from the PCoIP Zero Client?
Wake-on-LAN behaviour changed from Windows 7 to Windows 8, 8.1 and 10, preventing the PCoIP Zero Client from waking the host PC if the PCoIP Zero Client was configured to send the WoL packet to the host PC NIC and not the PCoIP Remote Workstation Card. …
Knowledge Base Article Troubleshooting Remote Workstation Card Zero Clients
Last modified: September 19, 2023
412
How many hosts are discovered when using SLP Host Discovery?
When using a session connection type setting of  Direct to Host +SLP Host Discovery , the PCoIP Zero Client can discover up to 10 hosts and will display the first 6 identified. The list may change on subsequent sessions.   … How many hosts are discovered …
Knowledge Base Article Advisory Remote Workstation Card Zero Clients
Last modified: September 14, 2023
406
Can I enable NTP time on a PCoIP Zero Client or PCoIP Remote Workstation Card using DHCP options?
Answer: Yes. NTP time servers can be added to DHCP options 042 based on IP scope or as a default for all IP scopes. It is important to note that this feature may impact setting the time server by the PCoIP Management Console Profile or the Administrator …
Knowledge Base Article Advisory Remote Workstation Card Zero Clients
Last modified: September 12, 2023
391
Why do I see black bars on the side or bottom of my display when connecting to a zero client?
Scenario : When connecting a display (TV or monitor) to a PCoIP zero client you get solid black bars at the top and bottom or left and right sides of the display. It appears as if the image is being cut off. Resolution : This issue is caused by ' …
Knowledge Base Article Troubleshooting Display HP Anyware Remote Workstation Card Zero Clients
Last modified: July 15, 2023
382