Why is my 802.1x configuration failing on my older network?
Scenario 1 In an environment that contains legacy network equipment, after setting up 802.1x, initial authentication fails. The authentication switch does not respond to any of the EAP-TLS request packets from the PCoIP Zero Client.   Cause Some legacy …
Knowledge Base Article Troubleshooting Security Remote Workstation Card Zero Clients
Last modified: November 23, 2022
509
PCoIP TROUBLESHOOTING STEPS: IEEE 802.1x Network Authentication
This article provides a brief list of troubleshooting steps for common issues with 802.1x authentication. It is not intended to be a comprehensive troubleshooting guide. These include scenarios for: Problems uploading IEEE 802.1x certificates to PCoIP …
Knowledge Base Article Troubleshooting Security Remote Workstation Card Zero Clients
Last modified: September 7, 2023
500
Cannot connect to the web interface (AWI) of a zero client or remote workstation card after changing the Label name.
Scenario You modify the label name of your zero client or remote workstation card and after reboot you cannot connect to the web interface using the FQDN. For example the default label name may be similar to pcoip-portal-0030040c8f2d You modify it to …
Knowledge Base Article Troubleshooting Remote Workstation Card Zero Clients
Last modified: September 19, 2023
503
Can a WAN accelerator be used to improve the performance of PCoIP sessions?
PCoIP does not benefit from a WAN accelerator, legacy WAN accelerator solutions use different methods to improve the performance of applications operating over congested networks. These methods include compressing packets, implementing proxy servers that …
Knowledge Base Article Advisory Performance HP Anyware Remote Workstation Card
Last modified: December 14, 2022
492
Why does the message "Host driver may not be loaded" appear in the event log for PCoIP Remote Workstation Card?
Scenario The PCoIP event logs for a PCoIP Remote Workstation Card (host card) may contain one or more log entries with the message  Host driver may not be loaded . The following are a couple of examples of such entries: [0d,00:22:53.800> LVL:2 RC: 0 …
Knowledge Base Article Advisory Remote Workstation Card
Last modified: September 19, 2023
489
Requirements for the Leostream broker to automatically detect a PCoIP Remote Workstation Card?
Requirements For the Leostream broker to automatically detect a Remote Workstation Card the following components must be installed: PCoIP Remote Workstation Card inserted in the host PC Leostream Connection Broker 7.7 or newer Leostream Agent 5.5.95 or …
Knowledge Base Article Tutorial Third Party Enhancements Remote Workstation Card HP Anyware
Last modified: September 19, 2023
469
What are the cabling requirements in a Remote Workstation Card environment?
Answer: HP Anyware PCoIP Remote Workstation Cards and PCoIP Zero Clients are designed considering port pass through and should be connected in a specific manner to limit potential display issues. In a PCoIP workstation environment ensure the connection …
Knowledge Base Article Advisory Display Remote Workstation Card
Last modified: August 2, 2023
466