Management Console profile is not applied to the Remote Workstation Card
Applying a Profile to a Remote Workstation Card from PCoIP Management Console will be unsuccessful if the Enable Audio setting on the Remote Workstation Card has never been enabled (default is disabled) or the Remote Workstation Card has not had the Enable Audio setting enabled since the last Reset Parameters setting has been applied. In either case, after attempting to apply the profile, the PCoIP Management Console may display incorrect statuses of the endpoint.
For example, if the profile attempted to peer the Remote Workstation Card to a PCoIP Zero Client, the status will display as peered when the Remote Workstation Card may be in a state ready to accept any connection.
As a workaround, to make sure your profile is applied to the Remote Workstation Card correctly, ensure the Enable Audio setting has been enabled in the profile you are applying or ensure the Enable Audio setting has been enabled once prior to applying a new profile.
For example, if the profile attempted to peer the Remote Workstation Card to a PCoIP Zero Client, the status will display as peered when the Remote Workstation Card may be in a state ready to accept any connection.
As a workaround, to make sure your profile is applied to the Remote Workstation Card correctly, ensure the Enable Audio setting has been enabled in the profile you are applying or ensure the Enable Audio setting has been enabled once prior to applying a new profile.