Why does my Tera2 PCoIP Zero Client perform poorly on a WAN, compared to a software client on the same network?
If you are experiencing refresh issues of image data when scrolling through text and/or images using a PCoIP Zero Client on a WAN network, ensure that you enable the Low Bandwidth Text Codec (LBTC) setting. Note: The LBTC setting is available on TERA2321 …
Why do my PCoIP Zero Clients randomly disconnect after upgrading to firmware 3.5.x to Firmware 4.8.1?
Scenario PCoIP Zero Clients randomly disconnect (approximately every 15-20 minutes) from the PCoIP session. In PCoIP Zero Client log file you can find the following lines: 0d,00:02:15> LVL:2 RC: 0 GSOAP :SOAP 1.2 fault: SOAP-ENV:Sender [no subcode] …
PCoIP Configuration Guide
Helps you to understand the configurations that you can do on PCoIP Agents and Clients. ~65 mins This course will help you to understand the different configurations that can be done on the Agents and Client in order to optimize PCoIP performance. After …
PCoIP Management Console 2.x and 3.x is not loading pages properly when accessing the web interface via the FQDN
Problem Using fully qualified domain name (FQDN) in your browser to access the PCoIP Management Consoles web interface displays only a portion of the page. Using the IP address, the web interface page is displayed properly and user is prompt for user name …
Recommend upgrading LLS 21.03 or earlier to the latest LLS to avoid service disruption
Our third-party license provider is upgrading certificates in March 2023 If you are running a  supported  HP Anyware Local License Server (LLS) or using the Cloud License Service (CLS), you will not be impacted by these changes.  The new certificates are …
Why does the PCoIP Zero Client OSD image quality preference slider not have any effect on PCoIP session?
Answer: Activation of the  Image Quality Preference slider requires enablement of the  check box found in the  Configure PCoIP image quality levels  ADM GPO variable shown below.   The Image Quality Preference slider (shown below) resides in the OSD under …
Can a WAN accelerator be used to improve the performance of PCoIP sessions?
PCoIP does not benefit from a WAN accelerator, legacy WAN accelerator solutions use different methods to improve the performance of applications operating over congested networks. These methods include compressing packets, implementing proxy servers that …
Requirements for the Leostream broker to automatically detect a PCoIP Remote Workstation Card?
Requirements For the Leostream broker to automatically detect a Remote Workstation Card the following components must be installed: PCoIP Remote Workstation Card inserted in the host PC Leostream Connection Broker 7.7 or newer Leostream Agent 5.5.95 or …