How do I avoid the red "HTTPS" in server address in the Connection Dialog on a PCoIP Zero Client?
All HP Anyware and VMware View 5.1 or newer has connection security requirements that are supported in PCoIP Zero Client firmware 4.0.0 or newer.  There are multiple scenario's with the certificate check that can result in a warning message and/or a red   …
The Mouse and Keyboard are not working with the HP Anyware PCoIP Linux Agent
Problem When connecting to a Linux desktop running the HP Anyware PCoiP Agent for Linux Standard or Graphics, you have no keyboard or mouse input but your desktop shows.   Cause There are two main reasons why this can happen: The display topology between …
How do I fix the unsecure browser warning when accessing the PCoIP Management Console web interface?
Problem When accessing the Management Console web interface the web browser displays a message such as "This site is not secure", "Your connection is not secure" or "Your connection is not private"   Cause The web browser cannot validate the security …
What does "No Available Hosts for Connection" mean?
The message "No Available Hosts for Connection" appears if the PCoIP Zero Client has enabled the Host Discovery feature and tries to establish a session but cannot find a PCoIP Remote Workstation Card that is not currently in a session on the network. If …
Display resolution, topology, image artifacts or rendering-performance issues in HP Anyware with a GPU
Symptoms If you are using HP Anyware's Graphics agents with a GPU, either Nvidia GRID or AMD FirePro, the following issues may be caused by incorrect GPU driver: Image tearing Image artifacts Slow connection times Display topology issues Low frame rates …
Why is the BIOS not visible when my Dell workstation boots with a PCoIP Remote Workstation Card?
Scenario The BIOS on a Dell R5500/R5400 is not visible on boot up. After the OS loads, the monitor then displays the desktop. On some graphic cards, only the primary port is active during the POST phase of the host PC boot process. For example, when using …
FAQ's Peripheral Devices
FAQ's - Webcam   General  Health Checks Troubleshooting How to troubleshoot Webcams Webcam will not show under attached devices in Zero Client. Webcam shows status as "Not Supported" in attached device. Webcam shows status as "USB device not supported …
Why does my PCoIP Zero Client indicate that it is unable to verify the View Connection Server's identity after the CA's root certificate has been uploaded via AWI and/or the PCoIP Management Console?
Problem The PCoIP Zero Client is presenting a certificate error when the server's corresponding Root CA or Intermediate Certificate has been loaded into the PCoIP Zero Client certificate store. The PCoIP Zero Client has a certificate check mode configured …
Troubleshooting artifacts in a PCoIP Session
Problem During a PCoIP Session artifacts are appearing on the screen. The artifacts may stay or slowly disappear.   Cause and Resolution There are may reasons artifacts may appear on the screen. Some may be source issues such as the application or …
Another device on the network has the same IP address as this device. Please contact your network administrator for assistance.
Problem PCoIP Zero Client OSD shows, "Another device on the network has the same IP address as this device.Please contact your network administrator for assistance." The PCoIP Zero Client or PCoIP Remote Workstation Card logs show: 0d,00:43:06.390> The …